DYNOmaxPERFORMANCE MEASUREMENT
EN
DeutschEnglishFrançaisItalianoEspañolPolskiNederlands
DYNOmax / Models

A dynamometer for your application.

From motorcycle testing to synchronised all-wheel-drive platforms. Choose according to your vehicles, test procedures and available space.

Choose a platform
10 Models

Dynamometer models

Motorcycle Dynamometer

MOTODYNO

A compact motorcycle dynamometer for power measurement and controlled load testing. With a 400 mm roller and an electromagnetic retarder.

900 hpMax. dynamic
300 km/hMax. speed
2WD Dynamometer

1500i 2WD

A 2WD inertia dynamometer for power runs without an electromagnetic retarder. An entry point into the DYNOmax range for a single driven axle.

800 hpMax. inertia
300 km/hMax. speed
2WD Dynamometer

1500BRD 2WD

The braked 2WD platform adds controlled load conditions and road simulation to power measurement. For applications focused on one driven axle.

1,200 hpMax. dynamic
300 km/hMax. speed
4WD Dynamometer

4000 4WD

The entry point to the conventional 4WD range. A braked platform with 280 mm rollers and one electromagnetic retarder.

1,500 hpMax. dynamic
300 km/hMax. speed
4WD Dynamometer

4000 4WD PRO

Two electromagnetic retarders within the 4000 platform family. For projects requiring the PRO model’s higher dynamic and static catalogue ratings.

1,900 hpMax. dynamic
300 km/hMax. speed
4WD Dynamometer

5000 4WD

A 4WD platform with 350 mm rollers and a maximum catalogue speed of 350 km/h. With one electromagnetic retarder.

2,000 hpMax. dynamic
350 km/hMax. speed
4WD Dynamometer

5000 4WD PRO

The 5000-series platform with two electromagnetic retarders. Up to 2,500 hp dynamic power and 1,500 hp static power according to the catalogue.

2,500 hpMax. dynamic
350 km/hMax. speed
4WD Dynamometer

6000 4WD PRO

A 4WD platform with 400 mm rollers and two electromagnetic retarders. Up to 3,000 hp dynamic power, with a maximum speed of 250 km/h.

3,000 hpMax. dynamic
250 km/hMax. speed
4WD Dynamometer

7000 4WD PRO

A differently proportioned 4WD PRO platform with 400 mm rollers, two electromagnetic retarders and up to 3,000 hp dynamic power.

3,000 hpMax. dynamic
250 km/hMax. speed
Synchronised

SYNCHRO 500

An electrically synchronised platform with 500 mm rollers. A catalogue measurement range of 5–1,200 kW and an energy-recovery concept.

5–1,200 kWMeasurement range
320 km/hMax. speed

Manufacturer specifications, 2026 catalogue. hp is the unit used in the catalogue. Power ratings may refer to different test modes. Equipment and vehicle compatibility require a project-specific assessment.

Narrow down the model range

Start with the platform filter: motorcycle, 2WD, 4WD or SYNCHRO. Then consider the test method. The 1500i is an inertia model; braked platforms provide additional load-testing capabilities. Model pages separate dynamic, inertia and static ratings, so compare the same operating mode.

A suitable power rating is only part of the decision. Rollers, axle loads, vehicle dimensions and maximum speed also matter. All-wheel-drive vehicles may impose additional drivetrain requirements. Use the model comparison to review the specifications before requesting a particular model or an open consultation.

Your next step

Ready for your
own test station?

Tell us what you want to test.
Let’s discuss the right configuration.

Discuss your projectOr call: +49 5451 4995296 ↗