6000 4WD PRO
A 4WD platform with 400 mm rollers and two electromagnetic retarders. Up to 3,000 hp dynamic power, with a maximum speed of 250 km/h.
Enquire about this model ↗Specifications ↓
PRODUCT IMAGE / EQUIPMENT MAY VARYOne model. More perspectives.
Views from the manufacturer's 2026 catalogue. The exact equipment is agreed for your project.
The facts.
In detail.
Specifications from the manufacturer’s 2026 catalogue. Power limits relate to different test modes and are not interchangeable.
Vehicle suitability, scope of supply and required infrastructure are clarified before an order.
| Measurement principle | Inertia and braked |
|---|---|
| Drive configuration | 4WD |
| Max. dynamic power | 3,000 hp |
| Max. speed | 250 km/h |
| Roller diameter | 400 mm |
| Max. axle load | 3,000 kg |
| Dimensions (L × W) | 4,225 × 3,655 mm |
| Braking torque (catalogue) | 2,000 Nm |
| Max. inertia power | 1,700 hp |
| Max. static power / road simulation | 1,500 hp |
| Electromagnetic retarders | 2 |
| Power supply | 220 V / 16 A |
| Compressed air (minimum) | 8 bar |
Configured for your application.
The manufacturer’s catalogue lists DynomiZer Wireless software and Omron sensors. WiFi modules for lambda, OBD and weather data are listed as options.
The catalogue describes above-ground and pit installation. The appropriate arrangement depends on the building, vehicles and intended operation.
A 4WD platform with 400 mm rollers
The 6000 PRO combines two electromagnetic retarders with 400 mm rollers. The manufacturer specifies up to 3,000 hp dynamic power, 1,700 hp inertia power and 1,500 hp static power. Which limit matters for your work depends on the test mode you intend to use.
The maximum speed is stated as 250 km/h. Despite its higher dynamic peak rating, the 6000 PRO is therefore not a universal replacement for the 350 km/h 5000 series. These models have different characteristics that should be compared against your vehicles and measurement requirements.
Make the room work for the installation
The platform measures 4,225 × 3,655 mm. Additional allowance is needed for vehicle length, access, cooling, exhaust extraction and working routes. The catalogue gives a braking torque of 2,000 Nm and a maximum axle load of 3,000 kg. A room sketch and examples of intended vehicles help prepare the discussion with AVM.
What to prepare for planning ↗Ready for your
own test station?
Tell us what you want to test.
Let’s discuss the right configuration.