Wie läuft eine Software- oder Prüfstandsarbeit bei AVM ab?

Zuerst Diagnose und Datenstand am Fahrzeug. Leistungswerte nennt AVM erst nach der Messung auf dem Dynomax-Prüfstand. Eine Abschaltung von Abgasreinigung gehört nicht zum Angebot.

Wie läuft eine Software- oder Prüfstandsarbeit bei AVM ab?

Zuerst Diagnose und Datenstand am Fahrzeug. Leistungswerte nennt AVM erst nach der Messung auf dem Dynomax-Prüfstand. Eine Abschaltung von Abgasreinigung gehört nicht zum Angebot.

DYNOmax / Model comparison

Compare the platforms.

Key DYNOmax specifications in one place. Compare test methods, rollers and operating limits before discussing your configuration.

Swipe sideways on small screens to see all specifications. →

DYNOmax dynamometer comparison
Model	Platform	Power / test mode	Rollers	Max. speed	Max. axle load
MOTODYNO ↗	Motorcycle	900 hpMax. dynamic	400 mm	300 km/h	1,000 kg
1500i 2WD ↗	2WD	800 hpMax. inertia	350 mm	300 km/h	3,000 kg
1500BRD 2WD ↗	2WD	1,200 hpMax. dynamic	325 mm	300 km/h	3,000 kg
4000 4WD ↗	4WD	1,500 hpMax. dynamic	280 mm	300 km/h	3,000 kg
4000 4WD PRO ↗	4WD	1,900 hpMax. dynamic	270 mm	300 km/h	3,000 kg
5000 4WD ↗	4WD	2,000 hpMax. dynamic	350 mm	350 km/h	3,000 kg
5000 4WD PRO ↗	4WD	2,500 hpMax. dynamic	350 mm	350 km/h	3,000 kg
6000 4WD PRO ↗	4WD	3,000 hpMax. dynamic	400 mm	250 km/h	3,000 kg
7000 4WD PRO ↗	4WD	3,000 hpMax. dynamic	400 mm	250 km/h	3,000 kg
SYNCHRO 500 ↗	Synchro	5–1,200 kWMeasurement range (data table)	500 mm	320 km/h	3,500 kg

Dynamic peak power, inertia power and static load power are different operating ratings. SYNCHRO 500 is specified with a measurement range in kW; the other models use hp from the manufacturer’s catalogue. Full specifications are listed on each model page.

Start with the test method

Power runs or controlled load points? The test objective determines the concept.

Consider the vehicles

Drive configuration, dimensions and permitted axle loads must match.

Include the site

Adequate space, suitable supplies and cooling belong in the design.

Compare power ratings in context

A higher dynamic peak rating is not automatically better for every test. For example, the 5000 models are rated for a maximum speed of 350 km/h, while the 6000 PRO is specified at 250 km/h. Their rollers and power limits also differ. Your planned procedure should guide the comparison.

SYNCHRO 500 is listed with a measurement range in kW; the other platforms use hp from the manufacturer’s catalogue. Different units may also represent different operating modes. A simple conversion would not resolve those differences. Discuss with AVM which measurements and operating limits your vehicles require.

Your next step

Ready for your
own test station?

Tell us what you want to test.
Let’s discuss the right configuration.

Discuss your project Or call: +49 5451 4995296 ↗