5000 4WD PRO
The 5000-series platform with two electromagnetic retarders. Up to 2,500 hp dynamic power and 1,500 hp static power according to the catalogue.
Enquire about this model ↗Specifications ↓
PRODUCT IMAGE / EQUIPMENT MAY VARYOne model. More perspectives.
Views from the manufacturer's 2026 catalogue. The exact equipment is agreed for your project.
The facts.
In detail.
Specifications from the manufacturer’s 2026 catalogue. Power limits relate to different test modes and are not interchangeable.
Vehicle suitability, scope of supply and required infrastructure are clarified before an order.
| Measurement principle | Inertia and braked |
|---|---|
| Drive configuration | 4WD |
| Max. dynamic power | 2,500 hp |
| Max. speed | 350 km/h |
| Roller diameter | 350 mm |
| Max. axle load | 3,000 kg |
| Dimensions (L × W) | 4,225 × 3,655 mm |
| Braking torque (catalogue) | 1,800 Nm |
| Max. inertia power | 1,500 hp |
| Max. static power / road simulation | 1,500 hp |
| Electromagnetic retarders | 2 |
| Power supply | 220 V / 16 A |
| Compressed air (minimum) | 8 bar |
Configured for your application.
The manufacturer’s catalogue lists DynomiZer Wireless software and Omron sensors. WiFi modules for lambda, OBD and weather data are listed as options.
The catalogue describes above-ground and pit installation. The appropriate arrangement depends on the building, vehicles and intended operation.
Higher load capacity within the 5000 series
The 5000 PRO is the two-retarder version of the 5000 platform. The manufacturer lists 2,500 hp dynamic power and 1,500 hp for both inertia and static operation. Compared with the 5000, the higher static rating is a useful starting point when assessing more demanding load measurements.
This model uses 350 mm rollers and has a stated maximum speed of 350 km/h. Its dimensions are 4,225 × 3,655 mm. The required power range depends on the planned vehicles and test procedures; the largest peak figure alone is not a sufficient basis for a configuration.
Prepare your project enquiry
Describe typical vehicles, desired load points and the available room layout. For all-wheel-drive vehicles, the drivetrain’s requirements must be clarified. Power supply, cooling and safe space for the vehicle and operators also matter. AVM Car Performance GmbH is your contact for bringing these requirements together.
What to prepare for planning ↗Ready for your
own test station?
Tell us what you want to test.
Let’s discuss the right configuration.