1500BRD 2WD
The braked 2WD platform adds controlled load conditions and road simulation to power measurement. For applications focused on one driven axle.
Enquire about this model ↗Specifications ↓
PRODUCT IMAGE / EQUIPMENT MAY VARYOne model. More perspectives.
Views from the manufacturer's 2026 catalogue. The exact equipment is agreed for your project.
The facts.
In detail.
Specifications from the manufacturer’s 2026 catalogue. Power limits relate to different test modes and are not interchangeable.
Vehicle suitability, scope of supply and required infrastructure are clarified before an order.
| Measurement principle | Inertia and braked |
|---|---|
| Drive configuration | 2WD |
| Max. dynamic power | 1,200 hp |
| Max. speed | 300 km/h |
| Roller diameter | 325 mm |
| Max. axle load | 3,000 kg |
| Dimensions (L × W) | 1,220 × 3,620 mm |
| Braking torque (catalogue) | 1,800 Nm |
| Max. inertia power | 800 hp |
| Max. static power / road simulation | 1,000 hp |
| Power supply | 220 V / 16 A |
| Compressed air (minimum) | 8 bar |
Configured for your application.
The manufacturer’s catalogue lists DynomiZer Wireless software and Omron sensors. WiFi modules for lambda, OBD and weather data are listed as options.
The catalogue describes above-ground and pit installation. The appropriate arrangement depends on the building, vehicles and intended operation.
2WD measurements under controlled load
The 1500BRD 2WD combines inertia testing with braked operation. Within the 1500 series, it is the platform to consider when your measurements include controlled load conditions and the road simulation described in the catalogue. Start the selection process with your intended vehicles and the load points you need to examine.
The catalogue specifies 1,200 hp dynamic power, 800 hp inertia power and 1,000 hp static power. These figures refer to different operating modes and should not be treated as interchangeable limits. The specified braking torque is 1,800 Nm.
Match the platform to your application
The 325 mm rollers, 3,000 kg maximum axle load and 1,220 × 3,620 mm dimensions provide the starting point for a technical comparison. For an existing room, access, vehicle length and operator space are also important. Tell AVM about your front- or rear-wheel-drive vehicle focus and the test procedures you intend to use.
What to prepare for planning ↗Ready for your
own test station?
Tell us what you want to test.
Let’s discuss the right configuration.