SYNCHRO 500
An electrically synchronised platform with 500 mm rollers. A catalogue measurement range of 5–1,200 kW and an energy-recovery concept.
Enquire about this model ↗Specifications ↓
PRODUCT IMAGE / EQUIPMENT MAY VARYOne model. More perspectives.
Views from the manufacturer's 2026 catalogue. The exact equipment is agreed for your project.
The facts.
In detail.
Specifications from the manufacturer’s 2026 catalogue. Power limits relate to different test modes and are not interchangeable.
Vehicle suitability, scope of supply and required infrastructure are clarified before an order.
| Drive configuration | 2WD / 4WD, synchronised |
|---|---|
| Measurement range (data table) | 5–1,200 kW |
| Max. speed | 320 km/h |
| Roller diameter | 500 mm |
| Roller width per axle | 800 mm |
| Max. axle load | 3,500 kg |
| Synchronisation drives | 2 × 100 kW |
| Retarder | 1 × 1,500 Nm per axle |
| Wheelbase | 2,000–3,500 mm |
| Dimensions (L × W × H) | 4,500 × 3,600 × 600 mm |
| Weight (approx.) | 3,500 kg |
| Power supply | 220 V / 20 A |
| Cooling | Liquid cooling, closed circuit |
Configured for your application.
SYNCHRO 500 uses electric drives for axle synchronisation. The concept includes inertia and load operation as well as energy recovery. Configuration, energy system and vehicle compatibility are defined for the project.
Hybrid and electric vehicles require consideration of drivetrain controls, axle synchronisation and safe test procedures. This does not establish universal compatibility with every vehicle.
Axle synchronisation within the test concept
SYNCHRO 500 uses a distinct approach within the DYNOmax programme: electric drives support axle synchronisation. The catalogue specifies two synchronisation drives rated at 100 kW each, together with 500 mm rollers. Inertia and load operation are described; the specific test mode must be compatible with the vehicle’s control systems.
The data table states a measurement range of 5–1,200 kW. This is not directly interchangeable with the dynamic hp peak ratings of the other models. The maximum speed of 320 km/h and the stated wheelbase range of 2,000–3,500 mm are also relevant to selection.
Coordinate the energy system and site infrastructure
The concept includes energy recovery and liquid cooling. Their implementation belongs in the technical planning for the individual project. The specified dimensions are 4,500 × 3,600 × 600 mm and the approximate weight is 3,500 kg. Building access, installation, electrical supply and cooling should be considered together. AVM collects your vehicle and site requirements for the next planning step.
What to prepare for planning ↗Ready for your
own test station?
Tell us what you want to test.
Let’s discuss the right configuration.